PPF APLICATION GEL.

ProWrap® Aplication Gel - easy for ppf instalation

PPF GEL

Discover Prowrap GelPPF, the ideal solution for professional installation of PPF protective films. This premium installation gel offers easy pouring, extended working time, and stretchability without pre-tacking marks, ensuring a clean, uniform finish. With excellent adhesion and reduced lift lines, GelPPF allows you to apply the film efficiently, even on complex surfaces.

Its viscous formula helps manage contaminants and is perfectly compatible with both spray bottles and tanks, enabling versatile and effortless application. Ideal for professionals seeking precision and quality in every detail.

PPF GEL

Available in the following quantities: 5L | 10L | 20L

Easy ppf aplication

Why Choose PPF GEL

PPF Gel is specifically engineered to make paint protection film applications faster, cleaner, and more professional. Unlike traditional soapy solutions, PPF Gel offers superior lubrication that prevents pre-tack marks, reduces lift lines, and ensures effortless repositioning on complex curves and contours.

Its advanced formula allows you to work with extended open time, giving you more control and precision during installation. Whether you’re applying film on large panels or intricate areas, PPF Gel helps you achieve a flawless, uniform finish without the hassle.

Additionally, PPF Gel minimizes contamination by encapsulating dust and debris, making it easier to squeegee them away. It’s compatible with both spray bottles and tanks, so you can adapt it to any workflow.

Choose PPF Gel to save time, reduce rework, and deliver consistently stunning results that keep your clients coming back.

Instructions for Using Gel PPF

Proper Surface Preparation

Use only a clay bar and polishing paste on edges and corners, applying manually with a cloth. Avoid polishing the entire surface before application unless necessary, but keep in mind that polishing will automatically increase the adhesion of the film compared to an unpolished surface, meaning you will need more lubrication with Johnson’s Baby.

Common Issues and Solutions

Gel doesn’t come out through the pump: Gradually dilute it with distilled water (max. 2L of water per 5L of gel). Check the diameter of the pump hose; if it’s too narrow, it must be replaced. Remove the filters from the sprayer handle, as they can block gel circulation.

Adjusting Gel Consistency

If the gel is too thick, dilute it with distilled water, but be aware: once diluted, it becomes more aggressive and adhesive. It is not recommended to apply a hood using only undiluted gel; it is necessary to dilute it with water and add at least 20 drops of Johnson’s Baby, regardless of whether the surface is polished or not.

Recommendations for the Application Surface

If the surface is polished (paint only, not headlights), it is recommended to add Johnson’s Baby – from 5 to 30 drops (depending on each installer) per 5L gel + max. 2L distilled water (depending on the pump used) for easier application. New headlights should always be polished with Carlexx ProCut and an abrasive pad, and edges should be polished manually with a cloth and polishing paste in a quick pass; otherwise, the film will not adhere.

Recommended Quantities for Application

▪︎ Hood: 1L gel + 300g distilled water + 25–35 drops of Johnson’s Baby (depending on ambient temperature, recommended between 19–22 °C).
▪︎ Front fenders / doors / rear fenders: 1L gel + 200g distilled water + 5–15 drops of Johnson’s Baby (a test is recommended before application).
▪︎ Front/rear bumpers with high tension: 5–15 drops of Johnson’s Baby, as needed (sometimes 5 drops are enough, other times just 1 drop).

Difficult or small areas: 1L gel + 300g or 200g distilled water, without Johnson’s Baby or with 1–2 drops of Johnson’s Baby.

Connect with us

Premium Protection

SAY TUNNED

Get our best offers via email.